Ø Lightweighted, compact, rugged, flexibly used in outdoor field environment
Ø Quick power on, high-resolution color touch screen
Ø Friendly key design for flexible scrolling and selecting
Ø More comprehensive test function, higher cost-effective
Ø Offer complete gigabit Ethernet solution from installation and commissioning to operation and maintenance
Lightweight structure design, comprehensive test functionalities
Function Features
|
Ø Generate full-duplex 10/100/1000 Mbps ethernet line speed stream
Ø Throughput, frame loss, latency, back-to-back measurements as per RFC2544
Ø RFC3393 jitter test
Ø Layer1/2 BERT test
Ø IP connect performance test
Ø Maximum generate 4 streams, the parameter of streams can be configured: MAC address, VLAN label, MPLS, IP address, payload and bandwidth.
|
Ø Flow priority can be set according to CoS and ToS/DSCP
Ø Package capture on line
Ø Test curve used for understanding network condition quickly and accurately
Ø Allowing automatic SLA verification through RFC2544, it is an efficient test tool for verifying SLA
Ø Installation operation maintenance and troubleshooting of gigabit Ethernet and IP service
Ø 2 layer CoS setting for verifying metro Ethernet service
RFC2544 Test
OTP6126 handheld gigabit Ethernet test set fully support RFC2544 standard, offer throughput, latency, frame loss and back-to-back test in metro network and generate complete test report.
Throughput Test
Latency Test
|
|
Frame Loss Test
Back-to-back Test
|
BERT Test
Transparent transport of Ethernet service over physical media is increasingly used in current network. OTP6126 Ethernet test set support Ethernet bit-error-rate testing (BERT) over layer1/2.
Frame Analysis Test
Frame generation and analysis test offer the best test ways for BER and RFC2544 test. Long-term capacity and performance test can find frame loss, in this way, service providers can test Ethernet links and verify SLAs performance.
OTP6126 Series Specifications
SPECIFICATIONS
|
Optical interface
|
|
1000Base-SX
|
1000Base-LX
|
1000Base-ZX
|
Wavelength(nm)
|
850
|
1310
|
1550
|
Tx level (dBm)
|
-9 to -3
|
-9.5 to -3
|
0 to +5
|
Rx level sensitivity (dBm)
|
-22
|
-22
|
-22
|
Maximum reach
|
550m
|
10 km
|
80 km
|
Transmission bit rate (Gbit/s)
|
1.25
|
1.25
|
1.25
|
Reception bit rate (Gbit/s)
|
1.25
|
1.25
|
1.25
|
Tx operational wavelength range (nm)
|
830 to 860
|
1270 to 1360
|
1540 to 1570
|
Measurement accuracy
|
Frequency (ppm)
|
<0.1
|
<0.1
|
<0.1
|
Optical power (dB)
|
<0.5
|
<0.5
|
<0.5
|
Transceiver type
|
SFP
|
SFP
|
SFP
|
Electrical interface
|
Duplex mode: full/half duplex
|
Compliance: 10/100/1000 BASE-T
|
Connector: RJ-45
|
Maximum reach: 100m
PHYSICAL SPECIFICATIONS
|
Temperature
|
Operating: -5°C to 50°C; Storing:-40°C to 70°C
|
Relative humidity
|
0% to 95% (non-condensing)
|
Size (H×W×D)
|
80mm x 135 mm x 250 mm
|
Weight
|
0.5 kg
ORDERING INFORMATION
|
Products
|
Model
|
Description
|
Handheld Test Set
|
OTP6126-1
|
Handheld Ethernet test set, one
10/100/1000Mbps Ethernet electrical
interface and one 1000Mbps Ethernet optical interface
|
OTP6126-2
|
Handheld Ethernet test set, two 10/100/1000Mbps Ethernet electrical interface and two 1000Mbps Ethernet optical interface
|
Accessories
|
GA14020010
|
1.25G SFP optical module, 850nm, 550m, SX
|
GA14020020
|
1.25G SFP optical module, 1310nm, 10km, LX
|
GA14020030
|
1.25G SFP optical module, 1550nm, 80km, ZX